Projects
E-mail Article to a FriendPrint ArticleBookmark and Share

Make Your Own Rustic Log Bench

A great use for leftovers

Contributed by Mike Portugue
Published: April 16, 2010
bench
Photo by Mark R. Johnson
If you’ve had a log cabin built for you recently, you probably have a pile of log pieces left over from construction. Most often, the pieces result from cutting the window and door openings. Don’t burn those logs; turn them into outdoor furniture!

You'll need the following materials:
  • For the bench seat and backrest, you need two log flats, either
  • 1/2-log thick or 1/3-log thick, about 4 1/2-feet long. You can adjust the length to fit the materials you have. “Flats” are logs that are round on one side and flat on the other side. If you only have full logs, you can cut them into flats using a chain saw or have your log contractor cut them for you.
  • For the bench base, you need four pieces (two for each side) of full logs, about 2-feet long. If you have skinny logs, you may need to stack more than two pieces to get the bench to the desired height.
  • 12 to 14 metal landscaping spikes or barn nails.
  • Eight 4-inch deck screws.
  • A small log or log flat cut to about 4 inches wide to mount the backrest.

cbn0510Fig34
Figure 1
Photo by Jay Smith
Step-by-step:

1. Level the ground where you plan to place the bench. The bench will be heavy when finished so it’s best to build it in place!

2. If necessary, sand the flat surfaces of the bench seat and backrest. You can omit this step if they’re already reasonably smooth.

3. Stack the full log pieces to form two bench bases.

4. Nail the log pieces together using landscaping spikes or barn nails. Use two or three nails per base, driving the nails through the top log into the bottom log. (Figure 1)
cbn0510_Fig5
Figure 2
Photo by Jay Smith
5. Using a chainsaw or wood chisel, cut a half-moon shape into the top of each bench base to provide a saddle for the bench seat. (Figure 2)

6. Nail two landscaping spikes or barn nails a few inches from each edge of the bench seat into the top of the bench base on each side. (Figure 2)


cbn0510_Fig7
Figure 3
Photo by Jay Smith
7. Nail the backrest support logs to the end of each bench base using two nails on each side. (Figure 3)

LOGBENCHcbn0510_Fig8
Figure 4
Photo by Jay Smith
8. Screw the backrest to the backrest support logs using three or four screws per side. (Figure 4)

9. Optionally, stain or finish the bench.

When he isn't crafting outdoor furniture out of logs, Mike likes to boat, fish and water-ski with his wife and two Portuguese water dogs at their cabin.

Related Issues
SEARCH SITE
Subscriber Only Content
Subscriber Only Content
Look for this icon. This denotes premium subscriber content.  Learn more »
Become a Member
Register online for access to more valuable resource information.
Don't miss your connection to the reader forums, projects, photo galleries, and more.
Subscriber and Member Login

Free Twice-Monthly E-Newsletter

Receive useful tips & inspiration from Cabin Life